0% FOR 60 MONTHS ON ALL NEW MAJOR CASE IH HAY AND FORAGE EQUIPMENT. OFFER ENDS JUNE 30, 2013
The FHX300 has a wide, 25.5-in. (647.7-mm) throat opening to swallow even the heaviest crops. The feedrolls move material smoothly and evenly into the cutterhead.
Rugged, 21-in. (533-mm)-diameter cutterhead
A powerful 1,000-rpm blower moves crops quickly to fill wagons and trucks fast. Works efficiently regardless of whether you’re working in wet, heavy hay or an easy-to-blow crop like corn.
Electronic remote controls allow you to rotate the spout 90 degrees. The spout is easily repositioned to fill towed forage wagons or trucks to the left. From your tractor seat, you control:
Convenient adjustments make it easy to keep the FHX300 chopping at peak efficiency.
The shearbar adjustment is also fast and easy for optimum cutterhead performance. Feedrolls lift up for easy cleaning and inspection of shearbar and smooth roll scraper.
The FHX300 allows for precise cut-length adjustment. Control length of cut by:
Achieve a cut length from 3/16 in. to 7/16 in. (5 mm to 11.1 mm) with all 12 knives. With only four knives selected, achieve a cut length as long as 1 5/16 in. (33.3 mm).
Detector stops feedrolls within a fraction of a second — before metal can damage the cutterhead. How it works:
The processor maximizes feed quality in corn silage, saving time and cost by chopping and processing in one operation. By removing the material baffle and the processor drive belt, you can chop haylage.
Crop coming from the cutterhead is propelled between two 8-in. (203-mm)-diameter fluted rolls. The top roll turns 15 percent faster than the bottom roll, providing the scuffing action necessary to crack kernels and break cob pieces. This results in:
Ground-hugging HDX10P/HDX20P windrow pickups gather the entire crop.
Grabs every stalk grown, even in lodged crop conditions.