GRAIN HANDLING/RESIDUE MANAGEMENT
Large grain tanks, longer augers, faster unloading speeds and quick-folding, no-tools-required extensions are standard on all Axial-Flow® models, so you can unload on-the-go in comfort for maximum productivity. Residue management systems can tailor residue to your tillage and livestock demands. |
Grain Handling Capacity
|
Model |
Unload Auger Length
ft. (m) |
Total Cleaning Area cu. in. (m2) |
Clean Grain Elevator Cap., bu./hr (L/hr) |
|
5088 |
21 & 24 (6 & 7) options |
7,947 (5.1) |
3,450 (121,575) |
|
6088 |
21 & 24 (6 & 7) options |
7,947 (5.1) |
3,450 (121,575) |
|
7088 |
21 & 24 (6 & 7) options |
7,947 (5.1) |
3,450 (121,575) |
|
7120 |
21 (6) standard
24 (7) option |
8,370 (5.4) |
6,000 (211,434) |
|
8120 |
21 (6) standard
24 (7) option |
10,075 (6.5) |
6,000 (211,434) |
|
9120 |
21 (6) standard
24 (7) option |
10,075 (6.5) |
6,000 (211,434) |
Grain Tanks
- 350-bu. (12,330-L) grain tank on the 8120 and 9120
- 315-bu. (11,100-L) grain tank on 7120 model
- 300-bu. (10,570-L) grain tank on the 6088 and 7088
- 250-bu. (8,810-L) grain tank on the 5088
- All Axial-Flow combines include:
- Standard, quick-folding grain tank extensions that don’t require tools
- An optional in-cab folding grain tank extension package
- Allows for one-switch control of folding without sacrificing overall grain tank capacity
- Inclined delivery auger folds in conjunction with grain tank extensions – in less than one minute, with no tools
- Makes easy work of switching from field to transport
Clean Grain Elevator Capacity
- Industry-leading 6,000-bu. (211,434-L) per hour clean grain elevator on 7120, 8120 and 9120 combines
- Features paddles that measure 5 x 10 in. (13 x 25 cm)
- Ensures sufficient capacity in the toughest corn crop
- Clean grain elevator capacity has increased 15%, to 3,450 bu. (121,575 L) per hour, on 88 Series combines
- Resulting in higher productivity without compromising grain quality or increasing horsepower requirements
- 88 Series combines feature:
- Improved elevator inlet geometry
- A larger clean grain cross auger – increased 1/2 in. (1 1/4 cm) diameter
- Redesigned inclined delivery auger
- Elevator tensioning, including yield monitor load sensor, is adjusted at ground level using a single wrench
Unload Augers
- Standard 21 ft. (6 m) and optional 24 ft. (7 m) unload augers with 3.2-bu. (113-L) per sec unload rate on Axial-Flow 7120, 8120 and 9120 models
- Features angled discharge boot designed to control unloading stream
- 5088, 6088 and 7088 models have 18-, 21- and 24- ft. (5-, 6-, 7-m) unload auger options and a 3.0-bu. (106-L) per sec unload rate
- To aid in clean-out, standard full-length clean grain and tailings cross-auger troughs drop down easily with improved access
- Adjustable, no-tools required, spring loaded latched auger tent covers allow easy adjustment to match desired unload rate and reduced torque load
- Heavier grain tank cross auger drive chains and sprockets extend performance and service life
- Auger lengths on all Axial-Flow models allow you to maintain a comfortable distance between the header and the grain cart while unloading on the go
Residue Management Systems
- Switch between three different residue management options on 20 Series Axial-Flow combines – with no tools
- Spread all of the residue
- Windrow the straw and spread the chaff
- Windrow all the residue
- 20 Series Axial-Flow combines standard features include:
- Hydraulically-driven, variable speed spreader drive
- Proven vertical twin disk spreader system with in-cab speed control – spreads residue as far as 45 ft. (14 m)
- 88 Series combines feature:
- A two-speed spreader drive design, enhanced with a spring-loaded, over-center tensioner that allows for quicker spreader speed changes
- Longer spreader shafts and surround curtains for consistent, even residue spreading
- A two-position straw hood that aids in windrow formation
MagnaCut Chopper
- New fine-cut 3 x 3 MagnaCut chopper option is available on 7120, 8120 and 9120 models
- With 126 rotating knives for increased residue performance
- Great where fine residue chopping is required
- Won a prestigious AE50 award from the American Society of Agricultural and Biological Engineers
|
|