HYDRAULICS/HITCH/PTO FOR MODELS 180, 190, 210, 225
Magnum™ tractors feature a redesigned, high-powered hydraulic system, based on a single pressure and flow compensating (PFC) pump for high-capacity, quick response time and the flexibility to simultaneously perform several functions. Magnum hitch geometry ensures well-balanced and stable operation. Hydraulically activated, electronically controlled PTO system provides smooth modulation and component protection.
|
Hydraulics
- Remote quick couplers
- Optional power beyond includes supply and return couplers, load sense and case drain
- Programmable valve timer
- Standard Performance Instrumentation, individual valve timers allow the operator to tailor the hydraulic circuits to meet implement requirements
- Main implement pump flow:
- Magnum 180 - 210 FPS at 35.7 gpm (135 Lpm)
- Magnum CVT 180, 190, 210 and 225 at 40 gpm (150 Lpm). Three electro-hydraulic remotes are standard; two optional valves can be added
- New Magnum 180, 190, 210 and 225 can be equipped with up to three mid-mount valves for easy loader installation
Hitch
|
Models |
3-Pt. Hitch Category |
Hitch Lift Capacity
Std./Opt.,
lbs. (kg) |
Opt. 3-Pt. Hitch Category |
Lift Capacity,
lbs. (kg) |
|
Magnum 180 |
Cat II/III |
10,900 (4944)/
13,600 (6168) |
NA |
NA |
|
Magnum 190 |
Cat II/III |
10,900 (4944)/
13,600 (6168) |
NA |
NA |
|
Magnum 210 |
Cat II/III |
10,900 (4944)/
13,600 (6168) |
NA |
NA |
|
Magnum 225 |
Cat II/IIIN |
10,900 (4944)/
13,600 (6168) |
NA |
NA |
- Standard Magnum hitches
- Cat II/IIIN on the 180, 190, 210 and 225 models
- Hitch geometry ensures well-balanced and stable operation, due to a pull point that creates a downward force on the front axle
- Results in better traction with less weight needed for ballasting
- Advanced electronic draft control
- Standard
- Easy to operate
- Very effective in various soil types
- Adjustable lift rods ensure ample ground clearance even with subsoiler shanks
- Hitch has full-sway, limited-sway and no-sway adjustments to match all applications
- Slip Limit Control option causes the hitch to automatically adjust to maintain a pre-selected percentage of wheel slippage
- Hitch can be programmed for position and load and allows for automatic adjustments to preset slip limits
- Secondary hitch functions are located under the padded right-hand armrest cover
PTO
- With the Magnum 180, 190, 210 and 225, an independent 540/1,000 rpm PTO with a soft-start and coast down feature is standard
- Following interchangeable shafts come standard on the Magnum 180, 190, 210 and 225 models
- 540 rpm, 1 3/8-in. (35-mm) shaft
- 1,000 rpm, 1 3/8-in. (35-mm) shaft
- 1,000 rpm, 1 3/4-in. (44-mm) shaft
|
|